Skip to product information

GNX USB Controller (HID-Main)

Rs. 1,500.00
Rs. 1,500.00
Excludes Shipping & Handling fee.

GNX USB Controller (HID-Main)

The GNX USB Controller provides USB connectivity for GNX modules to the PC (by default, GNX modules interconnect via BUS cable to each other and Gladiator NXT, but not directly to the PC).

Important:
MS Windows DirectInput allows for only 8 axis per controller.
You need 1x GNX-HID USB controller if there are more than 8 axis in your configuration (and another one if there are more than 2×8=16 axis).
Example: For 8 axis, you do not need a GNX-HID USB controller; however, for 9 to 16 axis you need 1 x GNX-HID USB controller, and for 17 to 24 axis 2 x GNX-HID USB controllers are required, and so on.

How to calculate the number of axis:

  • Gladiator NXT base: 3 axis
  • Gladiator Premium SCG grip: 3 axis
  • Gladiator Standard SCG grip: 1 axis
  • GNX-THQ or GNX-THQ-V: 3 axis
  • GNX-SEM or GNX-SEM-V: 2 axis
  • FSM-GA: 0 axis

Add all axis across your total configuration.
Then use above formula to determine how many GNX USB Controllers you need.

Examples:

  • Gladiator Premium with THQ, SEM and FSM-GA has 11 axis
    -> You need to order 1 x GNX USB Controller
  • Gladiator Premium with THQ (or THQ-V) has 9 axis:
    -> You need to order 1 x GNX USB Controller
  • Gladiator Premium with SEM (or SEM-V) has 8 axis:
    -> You do not need to order an extra GNX USB Controller
  • Gladiator Premium with FSM-GA has 6 axis:
    -> You do not need to order an extra GNX USB Controller
  • Gladiator Standard with THQ and SEM has 9 axis:
    -> You need to order 1 x GNX USB Controller

Please do not hesitate to contact support@vkb-sim.in for any assistance.

Specifications

  • NJoy32 platform
  • 32-bit ARM Controllers inside base and grip
  • Plug & Play with Driver-Free Installation (Recommended for Most Users)
  • Firmware Upgrade via USB
  • Onboard Memory for Storing Profiles
  • Optional Programming Software Available (For Advanced Users)
  • USB 2.0 HID controller
  • Type-C connection

Connectivity

  • USB 2.0

Compatible with

  • GNX THQ/V
  • GNX FSM-GA
  • GNX SEM/V

Contents

  • PCB board
  • Set of screws
  • USB Type-C cable (180 cm / 6′)
  • Transparent rubber lens

Instructions

Downloads

Warranty

  • 1 Year


Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
G
Gary Domaschenz
Great product

This product was easy to install with the video. Gives more options for extra devices. Love all of the well made VKB products that I have purchased.

Thank you Gary for your very positive feedback.

Happy flying!

Regards, VKB Support

C
C.K.
GNX USB Controller

Bought the controller to make my GNX-THQ stand alone. Also for possible future expansion with the other available
modules. It was easy to install and setup with the VKBDevCfg software. Works beautifully.

Thank you Craig for pointing out the usefulness of the USB Controller.
It adds a lot of flexibility to a GNX module setup.

VKB Support team

P
Philip Bradley

Works fantastic
Great service from the Oz team letting me know I needed the upgrade controller to make it stand alone

Thanks very much for the positive review, Philip.

We always strive to provide the most timely and accurate support possible.

Regards, VKB Australia team